تحويل الصورة إلى رسم.​​​​​​​Converting photo to sketch .من تقنيات الغرفة المظلمة

تقليص
X
 
  • تصفية - فلترة
  • الوقت
  • عرض
إلغاء تحديد الكل
مشاركات جديدة

  • تحويل الصورة إلى رسم.​​​​​​​Converting photo to sketch .من تقنيات الغرفة المظلمة

    اضغط على الصورة لعرض أكبر. 

الإسم:	٢٠٢٣٠٣٣١_١٨٠٩٤٤.jpg 
مشاهدات:	7 
الحجم:	117.2 كيلوبايت 
الهوية:	92232
    ​ Converting photo to sketch

    Some special effects have definite practical applications aside from purely illustrative purposes which makes them worth your careful consideration. You can make a photo- graph into a line drawing by using a crowquill pen and waterproof India ink. Simply outline all of the detail in a photograph with the pen in ink.

    Be sure all important details are drawn in. Once the image has been sketched in over the photograph and has dried, soak the print in a strong solution of Farmer's Reducer. The image will bleach out leaving only the ink rendition. The bleached print should then be rewashed and dried.

    Another method of producing a line, plus middle tones, rendition of a photograph is by the bas relief technique. This is an interesting process whereby a slightly thin positive on film is made from a negative, by contact printing. A continuous tone film should be used for making the positive and the film should be developed, fixed, washed and dried in the normal manner.

    When dried, the negative and positive should be sandwiched together, slightly out-of- register, so that an outline can be seen around the elements of the composition. When printed, the effect appears almost three-dimensional with areas of middle tones boldly outlined in a black edging. Many variations of the bas-relief effect can be obtained by carrying the steps of negative/positive to a second and third stage, by making different combinations of the films and changing the amount of mis-register between the films in the sandwich.
    *****&&&****
    تحويل الصورة إلى رسم

    بعض المؤثرات الخاصة لها تطبيقات عملية محددة بصرف النظر عن الأغراض التوضيحية البحتة مما يجعلها تستحق دراسة متأنية. يمكنك تحويل صورة رسم بياني إلى رسم خطي باستخدام قلم كروكييل وحبر هندي مقاوم للماء. ما عليك سوى تحديد كل التفاصيل في الصورة باستخدام القلم بالحبر.

    تأكد من رسم جميع التفاصيل المهمة. بمجرد رسم الصورة على الصورة وتجفيفها ، انقع الطباعة في محلول قوي من Farmer's Reducer. سوف تصبح الصورة مبيضة مع ترك الحبر فقط. يجب بعد ذلك إعادة غسل الطباعة المبيضة وتجفيفها.

    طريقة أخرى لإنتاج خط ، بالإضافة إلى الدرجات اللونية الوسطى ، تقديم صورة هي من خلال تقنية الإغاثة الأساسية. هذه عملية مثيرة للاهتمام حيث يتم صنع صورة موجبة رقيقة قليلاً على الفيلم من صورة سلبية ، عن طريق الطباعة الملامسة. يجب استخدام فيلم نغمة مستمر لصنع الفيلم الإيجابي ويجب تطوير الفيلم وتثبيته وغسله وتجفيفه بالطريقة العادية.

    عند التجفيف ، يجب وضع العناصر السالبة والموجبة معًا ، خارج نطاق التسجيل قليلاً ، بحيث يمكن رؤية مخطط تفصيلي حول عناصر التركيبة. عند الطباعة ، يظهر التأثير ثلاثي الأبعاد تقريبًا مع تحديد مناطق ذات درجات لونية متوسطة بخط عريض بحواف سوداء. يمكن الحصول على العديد من الاختلافات في تأثير التخفيف الأساسي عن طريق نقل الخطوات السلبية / الإيجابية إلى المرحلتين الثانية والثالثة ، عن طريق تكوين مجموعات مختلفة من الأفلام وتغيير مقدار الخطأ في التسجيل بين الأفلام في الشطيرة.
    اضغط على الصورة لعرض أكبر. 

الإسم:	Screenshot_٢٠٢٣٠٤٠١-١٤٤٤٥٣_Google.jpg 
مشاهدات:	10 
الحجم:	71.2 كيلوبايت 
الهوية:	92233 ​​​​​​​
    التقنيات الإبداعية في الغرفة المظلمة Creative Darkroom Techniques
يعمل...
X